This company is looking for a manufacturer to help design and manufacture a waterproof case for a visual marker for a medical application.

Approx size of the marker is 46x46x3.5 mm (samples can be provided), and the requirements are as follows:

  • Must be able to open and then reseal multiple times
  • Must be able to be sterilised multiple times without warping or degradation

The marker is used with a camera for computer assisted surgery, so visual clarity of the major face of the case is critical, similar to a GoPro waterproof case. On the back face of the case a connection feature is needed which is still in the design process, and some consultation would be necessary to determine the tolerance limitations etcetera as the case will interface with other instruments.

Currently we are using a 3D printed case with glass but this is impractical for re-use and sealing is not sufficient for trials beyond cadavers.

This would be a small run, less than 20 units for clinical trials in the near term with possibility for expansion in the longer term.

If this would be within your capabilities please make contact on the details below.

Chris Culhane
360 Knee Systems
cfculhane@gmail.com
0490 663 730
Pymble, Sydney NSW